Notes for bucket reinforcement:

A.Strengthen the root protection, side plate wear serious, will reduce the effective bucket capacity, affect productivity.At the same time, the edge cutter also helps to cut the material and protect the edge plate, so the excavator needs to install the edge cutter.Since the side is not a high wear area, the reinforcement of the side should not be too strong, so as not to affect the overall weight of the bucket.

2.It is necessary to reinforce the floor.Watson machinery advises customers buying new machines to polish off the paint on the bottom reinforcement bars (for about a week) before reinforcing the bottom plates so they weld better.The bottom plate shall be reinforced with a hard, wear-resistant long plate and shall protect the overall shape of the barrel from affecting the entry Angle and productivity.The welding of steel reinforcement shall follow the welding direction of the original machine reinforced plate and overlap the two plates.

3.It is recommended to strengthen the interior of the barrel by hardfacing, although it is expensive and time-consuming.However, its wear resistance and effectiveness are the strongest, or you can choose paste part reinforcement, not too much.To sum up, it is necessary to reinforce the excavator effectively and firmly.The final hard surface layer can also be used for reinforcement elsewhere.Henceforth, in order to protect bucket, bucket unfavorable lose productivity.