With the rise of a variety of high-rise buildings, many projects can not be completed by manpower, the role of the loader has also been reflected.Let the bucket teeth of the loader to give you a brief introduction.

Tip 1: loader loading will be reversed to the loading position and common materials: loader loading, pay attention to the location of the dump truck in the work area, which can save time and improve efficiency.

Tip 2: the loader loads as planned.The loader should consider the loading sequence before loading and should be as close to the front of the car as possible, as this does not indicate that the front half of the loader is missing when the loader is installed for the fast top seal.The loader should load as planned.

Tip 3: when the material is full, push the higher part to the horizontal.After full material, push material slowly.The bucket teeth of the loader attempt to push the material to the lower side as the loader cannot be raised to such a high height during actual loading.

If you're short of shovels, it's inconvenient to fill the front with too many LIDS at once.